Elite Series Firmware
洪堡 Elite Series Firmware
Choose your firmware based on your model number:
HM-5120 Current Version: 2.2.19 (08/18/2022)
HM-5150 Current Version: 2.1.54 (03/09/2023)
HM-5020 Current Version: 2.2.10 (01/25/2022)
HM-5030 Current Version: 2.1.51 (08/30/2023)
HM-5040 Current Version: 2.2.16 (08/30/2023)
HM-5320 Current Version: 2.1.41 (08/11/2021)
HM-5330 Current Version: 2.1.9 (06/11/2021)
HM-5470 Current Version: 2.2.21 (02/05/2024)
HM-5560 Current Version: 2.1.51 (08/09/2022)
HM-5750 Current Version: 1.0.24 (02/27/2019)
HM-5750A Current Version: 2.1.46 (10/07/2021)
HM-5750D Current Version: 2.1.46 (10/07/2021)
HM-5760 Current Version: 2.1.69 (07/12/2021)
HM-5240 Current Version: 2.2.21 (06/25/2021)
HM-2850 Current Version: 1.0.16 (11/07/2018)
HC-3186S Current Version: 1.1.7 (09/21/2020)
HCM-5080 Current Version: 2.6.53 (08/24/2023)
HCM-5070 Current Version: 2.6.53 (08/24/2023)
HCM-5090 Current Version: 2.6.53 (08/24/2023)
HM-5170 Current Version: 2.2.18 (03/09/2023)
HM-5755 Current Version: 1.0.13 (11/12/2020)
HM-5810 Current Version: 2.2.51 (09/11/2023)
HM-5820 Current Version: 2.2.51 (09/11/2023)
HM-5125 Current Version: 3.0.24 (02/26/2024)
HA-1068 Current Version: 1.0.12 (11/07/2019)
HM-5250 Current Version: 2.1.26 (10/20/2021)
HM-5120A Current Version: 2.1.13 (07/19/2023)
HM-5940 Current Version: 2.1.8 (08/24/2020)
HM-5170A Current Version: 2.1.13 (03/09/2023)
HM-5150A Current Version: 2.1.20 (03/09/2023)
边缘
Download the 洪堡 边缘 Software from the Microsoft Store
EDG h - 4114 sd.3F
Download and reporting software for EDG Guage
Gauge Reporting Software
2020年版本.04.14.315, Released 04.14.2020
Firmware Update for EDG SD Gauge only
EDG Firmware Version: 1.5.0
02年发布.20.2018 (E150R.mfu)
EDG Calibrator Software for H4114.单片机
EDG Calibrator Software
2019年版本.08.08.328, Released 08.08.2019
EDG C型
EDG C型 has been discontinued, if you need information on this product contact us at: 1.800.537.4183
Data Download Software
HM Data Download
Current version: 2024.05.02.135 (05/02/2024)
Minimum System Requirements
- Minimum Pentium 4 (32-bit) equivalent (Pentium Dual Core recommended)
- Minimum 512 MB RAM (1024 MB or more recommended)
- 300 MB swap space (or more)
- CD-ROM or DVD Drive
- Minimum 1024 x 768 display resolution
注意: 版本3.x require Hardware Firmware 版本4.0A或更大. 点击这里 for information for determining firmware version of your unit. Firmware upgrades must be done at 洪堡 factory.
核规 Software
Gauge Assistant
版本4.5.78 (EXE) – (12/07/2023)
(UNINSTALL any previous versions)
Note: Gauge Assistant is protected with a hard key.
联系 洪堡 for licensing information.
电子邮件
Phone: 1-800-537-4183
EZ2 Gauge Firmware
Firmware update for EZ2 Gauge
EZ2固件1.89
Released 04/25/2024 (EZ2_1_89.mfu)
NX Gauge Firmware
Firmware update for NX Gauge
NX固件1.60
Released 04/26/2024 (NX_1_60.mfu)
SD Model Software
Download firmware & reporting software for model SD nuclear gauges
Gauge Reporting Software
2020年版本.04.14.315 Released 04/14/2020
Firmware Update for SD Gauge with NiMH battery pack only
SD固件1.5.7
Released 03/07/2019 (N157RL.mfu)
Firmware Update for SD Gauge with LiON pack only
SD固件1.4.6
Released 11/04/2016 (N146RL.mfu)
电子邮件
Phone: 1-800-537-4183
Programmer 公用事业公司
EP1132
X-PRO
逻辑设备
Husky Programmer
逻辑设备
洪堡 IR Download
Note: F或使用 with 洪堡 核指标 and
GeoGauge. Not f或使用 with model SD gauges.
Last Updated: 10/25/2007
版本2.6.3 - (msi)
公用事业公司
HMTS Legacy Software
洪堡 Materials Testing Software (HMTS) (Legacy)
Current Version: 3.4.1029 (01/26/2018)
Minimum System Requirements
- Minimum Pentium 4 (32-bit) equivalent (Pentium Dual Core recommended)
- Minimum 512 MB RAM (1024 MB or more recommended)
- 300 MB swap space (or more)
- CD-ROM or DVD Drive
- Minimum 1024 x 768 display resolution
注意: 版本3.x require Hardware Firmware 版本4.0A或更大. 点击这里 for information for determining firmware version of your unit. Firmware upgrades must be done at 洪堡 factory.
htm资源
- HMTS Test Module Registration Instructions
- Excel Setup Instructions
- HMTS手册(10.26.2006)
- 快速的支持
- H-000379 USB to RS485 Driver